Windshield adhesive for mounting front, rear and side windows.
FAST POWER – 1K window adhesive
1-K PUR windshield adhesive FAST Power HM 400 ml incl. Bag tip
Art. no.: KSA-FP400-HM
High-modulus, one-component polyurethane adhesive and sealant for bonding windshields in motor vehicles, which cures very quickly due to reaction with atmospheric moisture. Very good for decorative joints and to putty. Easy to squeeze, only little force needed. Also suitable for decorative joints.
Fast Power HM is a cold processable, easy-to-handle windshield adhesive. It has excellent technical performance characteristics (antenna compatible, non-conductive) and offers a high level of quality and safety. It is suitable for replacement glazing for all, with and without airbag, equipped vehicles.
Fast Power HM can be used all year round. The safe drive-away time of 2 hours is achieved in a temperature range of +5 °C to +35 °C. Fast Power HM is manufactured in accordance with the ISO 9001 / 14001 quality assurance system and the Responsible Care program.
15 °C to 35 °C
Shore A hardness (DIN 53505)
max. 15 minutes
KSA FAST Power 400 ml windscreen adhesive bag
KSA Fast Power HM is specially developed for window replacement glazing. With its excellent performance characteristics and processing properties, it is equally suitable for mobile and stationary use.
The direct glazing sealant KSA FAST Power is characterized by the following properties:
- Very good stability with short thread tension
- high curing speed
- high modulus of elasticity and shear modulus
- High tensile shear strength, even after aging
- Very low electrical conductivity
- good adhesion to residual material
- excellent adhesion in combination with Primer All-in One on glass, glass with ceramic coating, pre-coating and on painted surfaces
- High UV resistance in combination with Primer All-in One
The properties and advantages
- cold processable
- antenna compatible
- Non corrosive
- Original equipment quality
- suitable for all vehicles
- high modulus
- Very good stability
- short thread breakage
- suitable for decorative joints
- easy to squeeze
- short travel time (60 min)
- Drive away time without airbag: 60 min.
- Drive away time with double airbag: 1 hour
- safe travel time 2 hours
- Application temperature: 5 to 35 °C
- OEM quality – meets OEM standards
- UV stable
- prevents contact corrosion on aluminum car bodies
The KSA FAST Power window adhesive is also available as a 310 ml cartridge. Each cartridge comes with a cartridge tip that you can cut to size yourself – this allows you to optimally dose the amount of adhesive as required.
Wide range of applications with KSA FAST POWER – 1K windshield adhesive
KSA FastPower is specially designed for window replacement glazing. With its excellent performance characteristics and processing properties, it is equally suitable for mobile and stationary use.
This product is suitable for experienced users only. Pre-testing is recommended for applications beyond automotive glass repair.
|Density||approx. 1.25 g/cm3|
|Curing type||moisture curing|
|Curing speed||approx. 3 – 4 mm/24 h|
|(DIN 50014 standard climate)||23°C, 50 % rLf|
|Shore A hardness (DIN 53505)||approx. 60|
|Tensile strength (DIN 53504)||approx. 8.5 MPa|
|Voltage value (DIN 53504)||approx. 3 MPa at 100 % elongation|
|Shear modulus (according to DIN 54451)||approx. 2.5 MPa|
|Elongation at break (DIN 53504)||approx. 350 %|
|Tensile shear strength||approx. 3 MPa (after 24 h DIN 50014)|
|(layer thickness 5 mm, following DIN EN 1465) 5 – 6 MPa (in final state)|
|(ASTM D 257-99/DIN IEC 60093)||approx. 109Ω cm|
|Volume change (DIN 52451)||< 1 %|
|Glazing time||max. 15 minutes *|
|Processing temperature||5°C to 35°C|
|Service temperature||-40°C to 90°C|
|short term (up to 1 h)||120°C|