Unsure which replacement glazing adhesive is right for you? Below you will find an overview of our OEM-quality adhesives.

Scheibenklebstoff zur Montage von Front-, Heck- und Seitenscheiben.

COOL POWER

1-component PUR window adhesive COOL Power HM

Art. no.: KSA-CP310-HM

View in store 60 minutes travel time extreme stability cold to process Original equipment quality pasty consistency also suitable for heavy, large slices short thread breakage

Comparison table

KSA Cool Power is a windshield adhesive with a unique selling point. It is an easy and cold to use high modulus one component polyurethane based disc adhesive with extreme stability.

Cool Power windshield adhesive is highly viscous and has extreme stability. It can be processed at temperatures from +15 °C to 35 °C and can be used for all common vehicles such as cars, trucks, buses, etc.

The KSA COOL Power HM complies with the specifications and approvals of the automobile manufacturers in accordance with FMVSS 212 and is therefore of original equipment quality.

Product with high shear modulus and low conductivity, free of PVC and solvents. Base: Polyurethane

This product requires a powerful battery press – squeezing with hand or compressed air press is not possible.

FAST POWER

1-component PUR windshield adhesive FAST Power HM

Art. no.: KSA-FP310-HM

View in store 60 minutes travel time Good stability cold to process Original equipment quality soft, smooth consistency also suitable for hand, compressed air presses easy to squeeze

Comparison table

High-modulus, one-component polyurethane adhesive and sealant for bonding windshields in motor vehicles, which cures very quickly due to reaction with atmospheric moisture. Very good for decorative joints and to putty. Easy to squeeze, only little force needed. Also suitable for decorative joints.

Fast Power HM is a cold processable, easy-to-handle windshield adhesive. It has excellent technical performance characteristics (antenna compatible, non-conductive) and offers a high level of quality and safety. It is suitable for replacement glazing for all, with and without airbag, equipped vehicles.

Fast Power HM can be used all year round. The safe drive-away time of 2 hours is achieved in a temperature range of +5 °C to +35 °C. Fast Power HM is manufactured in accordance with the ISO 9001 / 14001 quality assurance system and the Responsible Care program.

HOT POWER

1-component PUR windshield adhesive HOT Power HM

Art. no.: KSA-HP310-HM

View in store from 30 minutes travel time Good stability warm to handle Original equipment quality soft, smooth consistency can be applied very thinly easy to squeeze

Comparison table

KSA HOT Power is a warm-applied, high-modulus, one-component polyurethane adhesive. Easy to squeeze out, can be applied thinly and still maintain high strength.

HOT Power HM is preheated to 60 °C in the oven and can thus be processed even in cold outside temperatures. HOT Power HM forms a very stable adhesive bead.

The KSA HOT Power HM is high modulus and low conductivity and can therefore be used for vehicles with steel and aluminum bodies that require high modulus bonding according to the manufacturer’s specifications.

HOT Power HM meets automotive manufacturer specifications and approvals per FMVSS 212 (original equipment quality).

KSA COOL Power 310 ml window adhesive

Product description

KSA COOLPower is a one-component, extremely stable direct glazing adhesive/sealant based on polyurethane, which cross-links (cures) very quickly by atmospheric humidity to a rubber-elastic material and thus guarantees a very short drive-away time. Due to the high stability of the adhesive, the adhesive has a particularly large opening and special cartridge tips – the combination makes it possible to draw an optimal, stable adhesive bead.

The direct glazing sealant KSA Cool Power is characterized by the following properties:

  • perfect stability with very short thread breakage
  • very high curing speed
  • high modulus of elasticity and shear modulus
  • High tensile shear strength, even after aging
  • Very low electrical conductivity
  • good adhesion to residual material
  • excellent adhesion in combination with KSA GlassACTIVATOR (GA-030/GA-250) or KSA Primer All- In-One (PA-030/PA-250) on glass, glass with ceramic coating, precoating and on painted surfaces
  • high UV resistance in combination with KSA Primer All-In-One (PA-030/PA-250)

KSA FAST Power 310 ml window adhesive

Product description

KSA Fast Power HM is specially developed for window replacement glazing. With its excellent performance characteristics and processing properties, it is equally suitable for mobile and stationary use.

The direct glazing sealant KSA Fast Power is characterized by the following properties:

  • Very good stability with short thread tension
  • high curing speed
  • high modulus of elasticity and shear modulus
  • High tensile shear strength, even after aging
  • Very low electrical conductivity
  • good adhesion to residual material
  • excellent adhesion in combination with Primer All-in One on glass, glass with ceramic coating, pre-coating and on painted surfaces
  • High UV resistance in combination with Primer All-in One

KSA HOT Power 310 ml window adhesive

Product description

Warm-applied, high-modulus, one-component polyurethane adhesive. Easy to squeeze out, can be applied thinly and still maintain high strength.

The product must be warmed up before processing!

The direct glazing sealant KSA HOT Power is characterized by the following properties:

  • Extremely high holding capacity (“position tack”) directly after the joining process, i.e. no slipping of the sheets (advantageous for large and heavy sheets)
  • high modulus of elasticity and shear modulus
  • excellent adhesion in combination with ALLinONE primer on glass, glass with ceramic coating and on painted surfaces
  • good adhesion to residual material
  • high curing speed
  • high UV resistance in combination with ALLinONE primer
  • High tensile shear strength, even after aging
  • Very low electrical conductivity

 The properties and advantages 

  • short drive time
  • cold processable
  • high modulus
  • Non conductive
  • High stability
  • easy processing
  • short thread breakage
  • Non corrosive
  • Original equipment quality
  • UV stable
  • antenna compatible
  • suitable for all vehicles

The KSA COOL Power windshield adhesive is also available as a 400 ml tubular bag. Each cartridge comes with a cartridge tip that you can cut to size yourself – this allows you to optimally dose the amount of adhesive as required.

 The properties and advantages 

  • cold processable
  • antenna compatible
  • Non corrosive
  • Original equipment quality
  • suitable for all vehicles
  • high modulus
  • Very good stability
  • short thread breakage
  • suitable for decorative joints
  • easy to squeeze
  • short travel time (60 min)
  • Drive away time without airbag: 60 min.
  • Drive away time with double airbag: 1 hour
  • safe travel time 2 hours
  • Application temperature: 5 to 35 °C
  • OEM quality – meets OEM standards
  • UV stable
  • prevents contact corrosion on aluminum car bodies

The properties and advantages

  • short thread breakage
  • Non corrosive
  • Original equipment quality
  • UV stable
  • TÜV-tested
  • antenna compatible
  • suitable for all vehicles
  • short drive time
  • warm to process (60°C)
  • high modulus
  • Non conductive
  • High stability
  • easy processing

Each cartridge comes with a cartridge tip that you can cut to size yourself – this allows you to optimally dose the amount of adhesive as required.

Wide range of applications with KSA COOL POWER – 1K windshield adhesive
  • Bonding of front, rear and side windows into the body of motor vehicles (cars, trucks, buses, driver’s cabs of tractors/forklifts, special vehicles).
  • Gluing in side windows made of single glass or insulating glass in bus and railcar construction.
  • Furthermore, KSA COOLPower is suitable for all applications where a high electrical insulating effect of the window adhesive is required (e.g. as an antenna-compatible adhesive).
Wide range of applications with KSA FAST POWER – 1K windshield adhesive
  • KSA FastPower is specially designed for window replacement glazing. With its excellent performance characteristics and processing properties, it is equally suitable for mobile and stationary use.
  • This product is suitable for experienced users only. Pre-testing is recommended for applications beyond automotive glass repair.
Wide range of applications with KSA HOT POWER – 1K windshield adhesive
  • Bonding of front, rear and side windows into the body of motor vehicles (cars, trucks, driver’s cabs of tractors/forklifts, special vehicles).
  • Bonding of side windows made of safety glass and insulating glass in bus and wagon construction. The properties of the product have been tuned especially for applications where increased initial bond strength is required (no slippage of heavy panes, repair glazing).

 

View in store
View in store
View in store

Technical data

Color black
Smell weak
Consistency pasty smooth, stable
Density approx. 1.29 g/cm3
Solids content 100%
Curing speed moisture curing
(DIN 50014 standard climate) (23 °C, 50 % rLf)
Shore A hardness (DIN 53505) approx. 65
Tensile strength (DIN 53504) approx. 9 MPa
Voltage value (DIN 53504) approx. 3.5 MPa at 100 % elongation
Shear modulus (according to DIN 54451) approx. 2.5 MPa
Elongation at break (DIN 53504) approx. 400 %
Tensile shear strength (layer thickness 5 mm based on DIN 54451) approx. 3 MPa (after 24 h DIN 50014)
Layer thickness 5 mm, following DIN 54451 6 MPa (in the final state)
Volume resistivity (ASTM D 257-99/DIN IEC 60093) approx. 10^9Ω cm
Volume change (DIN 52451) < 1 %
Glazing time* max. 10 minutes
Processing temperature 5 °C to 50 °C
Safe drive away time** After 60 minutes
At risk of frost no
Storage time 12 months
Recommended storage temperature 10°C to 25°C
* Period from the beginning of the material application until the disc is placed.
** At a temperature from -10 °C to 35 °C

Cartridge tips also available separately in 25 pack – BKS-4225

400 ml tubular bag variant – Cool Power windshield adhesive

Technical data

Color black
Smell weak
Consistency smooth, stable
Density approx. 1.25 g/cm3
Solids content 100%
Curing type moisture curing
Curing speed approx. 3 – 4 mm/24 h
(DIN 50014 standard climate) 23°C, 50 % rLf
Shore A hardness (DIN 53505) approx. 60
Tensile strength (DIN 53504) approx. 8.5 MPa
Voltage value (DIN 53504) approx. 3 MPa at 100 % elongation
Shear modulus (according to DIN 54451) approx. 2.5 MPa
Elongation at break (DIN 53504) approx. 350 %
Tensile shear strength approx. 3 MPa (after 24 h DIN 50014)
(layer thickness 5 mm, following DIN EN 1465) 5 – 6 MPa (in the final state)
Forward resistivity
(ASTM D 257-99/DIN IEC 60093) approx. 10^9Ω cm
Volume change (DIN 52451) < 1 %
Glazing time max. 15 minutes *
Processing temperature 5°C to 35°C
Service temperature -40°C to 90°C
short term (up to 1 h) 120°C

Also available as tubular bag

Technical data

Color black
Smell weak
Consistency smooth, stable
Density approx. 1.25 g/cm3
Solids content 100%
Curing speed moisture curing
(DIN 50014 standard climate) (23 °C, 50 % rLf)
Shore A hardness (DIN 53505) approx. 65
Tensile strength (DIN 53504) approx. 9 MPa
Voltage value (DIN 53504) approx. 5 MPa at 100 % elongation
Shear modulus (according to DIN 54451) approx. 2.5 MPa
Elongation at break (DIN 53504) approx. 350 %
Tensile shear strength (layer thickness 5 mm based on DIN 54451) approx. 3.5 MPa (after 24h DIN 50014)
Layer thickness 5 mm, following DIN 54451 6 MPa (in the final state)
Volume resistivity (ASTM D 257-99/DIN IEC 60093) approx. 10^9Ω cm
Volume change (DIN 52451) < 1 %
Glazing time* max 10 minutes (period from the beginning of the
material application until the disc is placed).
Operating temperature -40 °C to 90 °C
Departure time** from 30 minutes
Warm-up time in the preheating box min. 30 minutes
At risk of frost no
Storage time 12 months
Recommended storage temperature 10°C to 25°C
* Period from the beginning of the material application until the disc is placed.
** At a temperature from -10 °C to 35 °C

Cartridge tips also available separately in 25 pack – BKS-4125

Our OEM windshield adhesives are also available as repair kits

The KSA Window Adhesive SET is used for replacement glazing. It includes the essential components that can be selected according to preference, such as 1K-PU windshield adhesive, plastic nozzle/adapter, primer, applicator and instructions. (Cleaning agents provided, we recommend KSA Universal Cleaner and High Performance Degreaser
PS-1000
).

Save with this convenient set compared to buying the components individually.

View in store

We have the right windshield adhesive for every user scenario. Whether you want to glaze cars, trucks, buses or other vehicles. With KSA Toolsystems 1K polyurethane windshield adhesives and the proven adhesive system, you are on the safe side. Trust years of experience and the high quality standard of our products. We will be happy to advise you in a non-binding phone call about the best window adhesive for you in vehicle glazing

Important: A secure future for polyurethane products

As of August 24, 2023, adequate training must be provided prior to industrial or commercial use

As from 24 August 2023 adequate training is required before industrial or professional use.

More information

Do you need to securely bond plastic sheets or different materials together?  

In some scenarios, you need to bond materials together where you can’t get anywhere with conventional window adhesives. For this case we have the special adhesives from Merbenit in our assortment. Whether you want to bond metals, powder-coated, painted, galvanized, anodized, chromated or hot-dip galvanized surfaces, various plastics, ceramics, glass, concrete and wood or plastic. We have the right adhesive in our range.

SK212 Adhesive SF50 Adhesive ST40 HS60
International Reseller UND GELISTETE HÄNDLER
Our sales partners and partner companies
OUR SHIPPING SERVICE PROVIDERS
Öffnungszeiten
Monday-Thursday

08:00 - 12:00 Uhr
13:00 - 17:00 Uhr

Friday

08:00 - 12:00
13:00 - 16:00

Kontakt
Contact form Write email

info(at)ksa-toolsystems.com

Call us

Tel.: 07223 2818247

Send fax

Fax: 07223 2818246

International Contact Information
E-mail

info(at)ksa-toolsystems.com

Call us

Phone +49 7223 2818247 Contact Mr. Skowronek

Send fax

Fax: +49 7223 2818246

Address
KSA Toolsystems GmbH
Factory road 14
D-77815 Bühl
KSA Toolsystems GmbH

We are your contact for special automotive glass tools, chemical products and workshop supplies. Except for the windows themselves, you get everything for the daily needs in your auto glass workshop.

Create user account Login and registration
KSA Toolsystems is supplier for autoglass special tools, chemistry and accessories, workshop equipment and much more.